simple

Inherits from: piso

SIMPLE type algorithm

Parameters:

[relax_pression] (type: float) Value between 0 and 1 (by default 1), this keyword is used only by the SIMPLE algorithm for relaxing the increment of pressure.
[seuil_convergence_implicite] (type: float) Convergence criteria.
[nb_corrections_max] (type: int) Maximum number of corrections performed by the PISO algorithm to achieve the projection of the velocity field. The algorithm may perform less corrections then nb_corrections_max if the accuracy of the projection is sufficient. (By default nb_corrections_max is set to 21).
[seuil_convergence_solveur] (type: float) value of the convergence criteria for the resolution of the implicit system build by solving several times per time step the Navier_Stokes equation and the scalar equations if any. This value MUST be used when a coupling between problems is considered (should be set to a value typically of 0.1 or 0.01).
[seuil_generation_solveur] (type: float) Option to create a GMRES solver and use vrel as the convergence threshold (implicit linear system Ax=B will be solved if residual error ||Ax-B|| is lesser than vrel).
[seuil_verification_solveur] (type: float) Option to check if residual error ||Ax-B|| is lesser than vrel after the implicit linear system Ax=B has been solved.
[seuil_test_preliminaire_solveur] (type: float) Option to decide if the implicit linear system Ax=B should be solved by checking if the residual error ||Ax-B|| is bigger than vrel.
[solveur] (type: solveur_sys_base) Method (different from the default one, Gmres with diagonal preconditioning) to solve the linear system.
[no_qdm] (type: flag) Keyword to not solve qdm equation (and turbulence models of these equation).
[nb_it_max] (type: int) Keyword to set the maximum iterations number for the Gmres.
[controle_residu] (type: flag) Keyword of Boolean type (by default 0). If set to 1, the convergence occurs if the residu suddenly increases.

solveur_u_p

Inherits from: simple

similar to simple.

Parameters:

[relax_pression] (type: float) Value between 0 and 1 (by default 1), this keyword is used only by the SIMPLE algorithm for relaxing the increment of pressure.
[seuil_convergence_implicite] (type: float) Convergence criteria.
[nb_corrections_max] (type: int) Maximum number of corrections performed by the PISO algorithm to achieve the projection of the velocity field. The algorithm may perform less corrections then nb_corrections_max if the accuracy of the projection is sufficient. (By default nb_corrections_max is set to 21).
[seuil_convergence_solveur] (type: float) value of the convergence criteria for the resolution of the implicit system build by solving several times per time step the Navier_Stokes equation and the scalar equations if any. This value MUST be used when a coupling between problems is considered (should be set to a value typically of 0.1 or 0.01).
[seuil_generation_solveur] (type: float) Option to create a GMRES solver and use vrel as the convergence threshold (implicit linear system Ax=B will be solved if residual error ||Ax-B|| is lesser than vrel).
[seuil_verification_solveur] (type: float) Option to check if residual error ||Ax-B|| is lesser than vrel after the implicit linear system Ax=B has been solved.
[seuil_test_preliminaire_solveur] (type: float) Option to decide if the implicit linear system Ax=B should be solved by checking if the residual error ||Ax-B|| is bigger than vrel.
[solveur] (type: solveur_sys_base) Method (different from the default one, Gmres with diagonal preconditioning) to solve the linear system.
[no_qdm] (type: flag) Keyword to not solve qdm equation (and turbulence models of these equation).
[nb_it_max] (type: int) Keyword to set the maximum iterations number for the Gmres.
[controle_residu] (type: flag) Keyword of Boolean type (by default 0). If set to 1, the convergence occurs if the residu suddenly increases.